Kikourou.net • Voir le sujet - au secour, training center en vrac!

Kikourou.net

Les forums de Kikouroù
https://paris.kikourou.net/forum/

au secour, training center en vrac!

https://paris.kikourou.net/forum/viewtopic.php?f=22&t=11353

Page 1 sur 1

au secour, training center en vrac!

MessagePublié: 13 Déc 2008, 15:19
par Papillon
Bon, j'ai un soucis... Training center de Garmin refuse de fonctionner!

Une fenêtre s'ouvre au démarrage en me disant qu'il y a un problème avec l'application

Puis

<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
<ErrorReport xmlns="http://www.garmin.com/xmlschemas/ApplicationErrors/v1">

<Error>
<Exception>
<SourceCodeLocation>
<SourceFileName>HISTORYTREE.CPP</SourceFileName>
<SourceFileLine>217</SourceFileLine>
</SourceCodeLocation>
<Extra>
Unable to locate main folder of type: 3
User's Main Folders are:
Name: Course à pied Type: 0
Name: Course à pied Type: 0
Name: Cyclisme Type: 1
Name: Autre Type: 2</Extra>
</Exception>
<Application>
<Name>Garmin Training Center(r)</Name>
<Build>
<Version>
<VersionMajor>3</VersionMajor>
<VersionMinor>4</VersionMinor>
<BuildMajor>3</BuildMajor>
<BuildMinor>0</BuildMinor>
</Version>
<Type>Release</Type>
<Time>May 20 2008, 16:58:11</Time>
<Builder>sqa</Builder>
</Build>
<LanguageID>1036</LanguageID>
<PartNumber>006-A0119-00</PartNumber>
</Application>
<Computer>
<OperatingSystem>Windows Vista Service Pack 1</OperatingSystem>
<Processor>x86, Processor Level: 6, Processors:4, Model: 23 Stepping: 7</Processor>
<RamSize>2097151</RamSize>
</Computer>
<Time>2008-09-20T10:52:19Z</Time>
</Error>

<Error>
<Exception>
<SourceCodeLocation>
<SourceFileName>IOU_USBLINKIMPL.CPP</SourceFileName>
<SourceFileLine>201</SourceFileLine>
</SourceCodeLocation>
<StackTrace>
<ReturnAddress>2000700139</ReturnAddress>
<ReturnAddress>9497758</ReturnAddress>
<ReturnAddress>6107730</ReturnAddress>
<ReturnAddress>4205101</ReturnAddress>
<ReturnAddress>216826860</ReturnAddress>
<ReturnAddress>2106283862</ReturnAddress>
<ReturnAddress>74943752</ReturnAddress>
<ReturnAddress>267437707</ReturnAddress>
<ReturnAddress>251670714</ReturnAddress>
<ReturnAddress>33364867</ReturnAddress>
<ReturnAddress>413230080</ReturnAddress>
<ReturnAddress>2332033024</ReturnAddress>
<ReturnAddress>1334387784</ReturnAddress>
<ReturnAddress>138921740</ReturnAddress>
</StackTrace>
</Exception>
<Application>
<Name>Garmin Training Center(r)</Name>
<Build>
<Version>
<VersionMajor>3</VersionMajor>
<VersionMinor>4</VersionMinor>
<BuildMajor>3</BuildMajor>
<BuildMinor>0</BuildMinor>
</Version>
<Type>Release</Type>
<Time>May 20 2008, 16:58:11</Time>
<Builder>sqa</Builder>
</Build>
<LanguageID>1036</LanguageID>
<PartNumber>006-A0119-00</PartNumber>
</Application>
<Computer>
<OperatingSystem>Windows Vista Service Pack 1</OperatingSystem>
<Processor>x86, Processor Level: 6, Processors:4, Model: 23 Stepping: 7</Processor>
<RamSize>2097151</RamSize>
</Computer>
<Time>2008-10-09T11:11:04Z</Time>
</Error>

<Error>
<Exception>
<SourceCodeLocation>
<SourceFileName>IOU_USBLINKIMPL.CPP</SourceFileName>
<SourceFileLine>201</SourceFileLine>
</SourceCodeLocation>
<StackTrace>
<ReturnAddress>1984381675</ReturnAddress>
<ReturnAddress>9497758</ReturnAddress>
<ReturnAddress>6107730</ReturnAddress>
<ReturnAddress>4205101</ReturnAddress>
<ReturnAddress>216826860</ReturnAddress>
<ReturnAddress>2106283862</ReturnAddress>
<ReturnAddress>74943752</ReturnAddress>
<ReturnAddress>267437707</ReturnAddress>
<ReturnAddress>251670714</ReturnAddress>
<ReturnAddress>33364867</ReturnAddress>
<ReturnAddress>413230080</ReturnAddress>
<ReturnAddress>2332033024</ReturnAddress>
<ReturnAddress>1334387784</ReturnAddress>
<ReturnAddress>138921740</ReturnAddress>
</StackTrace>
</Exception>
<Application>
<Name>Garmin Training Center(r)</Name>
<Build>
<Version>
<VersionMajor>3</VersionMajor>
<VersionMinor>4</VersionMinor>
<BuildMajor>3</BuildMajor>
<BuildMinor>0</BuildMinor>
</Version>
<Type>Release</Type>
<Time>May 20 2008, 16:58:11</Time>
<Builder>sqa</Builder>
</Build>
<LanguageID>1036</LanguageID>
<PartNumber>006-A0119-00</PartNumber>
</Application>
<Computer>
<OperatingSystem>Windows Vista Service Pack 1</OperatingSystem>
<Processor>x86, Processor Level: 6, Processors:4, Model: 23 Stepping: 7</Processor>
<RamSize>2097151</RamSize>
</Computer>
<Time>2008-10-15T05:19:06Z</Time>
</Error>

<Error>
<Exception>
<SourceCodeLocation>
<SourceFileName>IOU_USBLINKIMPL.CPP</SourceFileName>
<SourceFileLine>201</SourceFileLine>
</SourceCodeLocation>
<StackTrace>
<ReturnAddress>1986478827</ReturnAddress>
<ReturnAddress>9497758</ReturnAddress>
<ReturnAddress>6107730</ReturnAddress>
<ReturnAddress>4205101</ReturnAddress>
<ReturnAddress>216826860</ReturnAddress>
<ReturnAddress>2106283862</ReturnAddress>
<ReturnAddress>74943752</ReturnAddress>
<ReturnAddress>267437707</ReturnAddress>
<ReturnAddress>251670714</ReturnAddress>
<ReturnAddress>33364867</ReturnAddress>
<ReturnAddress>413230080</ReturnAddress>
<ReturnAddress>2332033024</ReturnAddress>
<ReturnAddress>1334387784</ReturnAddress>
<ReturnAddress>138921740</ReturnAddress>
</StackTrace>
</Exception>
<Application>
<Name>Garmin Training Center(r)</Name>
<Build>
<Version>
<VersionMajor>3</VersionMajor>
<VersionMinor>4</VersionMinor>
<BuildMajor>3</BuildMajor>
<BuildMinor>0</BuildMinor>
</Version>
<Type>Release</Type>
<Time>May 20 2008, 16:58:11</Time>
<Builder>sqa</Builder>
</Build>
<LanguageID>1036</LanguageID>
<PartNumber>006-A0119-00</PartNumber>
</Application>
<Computer>
<OperatingSystem>Windows Vista Service Pack 1</OperatingSystem>
<Processor>x86, Processor Level: 6, Processors:4, Model: 23 Stepping: 7</Processor>
<RamSize>2097151</RamSize>
</Computer>
<Time>2008-12-03T08:30:52Z</Time>
</Error>

<Error>
<Exception>
<SubId>0</SubId>
<SourceCodeLocation>
<SourceFileName>AFX_TASKBARICON.HPP</SourceFileName>
<SourceFileLine>60</SourceFileLine>
</SourceCodeLocation>
<Extra>Windows Error Code: 0
</Extra>
</Exception>
<Application>
<Name>gStart</Name>
<Build>
<Version>
<VersionMajor>2</VersionMajor>
<VersionMinor>3</VersionMinor>
<BuildMajor>0</BuildMajor>
<BuildMinor>0</BuildMinor>
</Version>
<Type>Release</Type>
<Time>Sep 6 2006, 10:24:11</Time>
<Builder>SQA</Builder>
</Build>
<LanguageID>1036</LanguageID>
<PartNumber>006-A0128-00</PartNumber>
</Application>
<Computer>
<OperatingSystem>WIN32 Windows Platform, Major Version: 6, Minor Version: 0 Service Pack 1</OperatingSystem>
<Processor>Pentium Pro or Pentium II</Processor>
<RamSize>2097151</RamSize>
</Computer>
<Time>2008-12-10T05:50:42Z</Time>
</Error>

<Error>
<Exception>
<SubId>5</SubId>
<SourceCodeLocation>
<SourceFileName>WIN_UTILITIES.CPP</SourceFileName>
<SourceFileLine>641</SourceFileLine>
</SourceCodeLocation>
<Extra>Windows Error Code: 5
Accès refusé.
Path: C:\ProgramData\GARMIN\Training Center\TCAcct\Debug\CourseTree.bin</Extra>
</Exception>
<Application>
<Name>Garmin Training Center(r)</Name>
<Build>
<Version>
<VersionMajor>3</VersionMajor>
<VersionMinor>4</VersionMinor>
<BuildMajor>3</BuildMajor>
<BuildMinor>0</BuildMinor>
</Version>
<Type>Release</Type>
<Time>May 20 2008, 16:58:11</Time>
<Builder>sqa</Builder>
</Build>
<LanguageID>1036</LanguageID>
<PartNumber>006-A0119-00</PartNumber>
</Application>
<Computer>
<OperatingSystem>Windows Vista Service Pack 1</OperatingSystem>
<Processor>x86, Processor Level: 6, Processors:4, Model: 23 Stepping: 7</Processor>
<RamSize>2097151</RamSize>
</Computer>
<Time>2008-12-12T07:47:14Z</Time>
</Error>

<Error>
<Exception>
<SubId>5</SubId>
<SourceCodeLocation>
<SourceFileName>WIN_UTILITIES.CPP</SourceFileName>
<SourceFileLine>641</SourceFileLine>
</SourceCodeLocation>
<Extra>Windows Error Code: 5
Accès refusé.
Path: C:\ProgramData\GARMIN\Training Center\TCAcct\Debug\CourseTree.bin</Extra>
</Exception>
<Application>
<Name>Garmin Training Center(r)</Name>
<Build>
<Version>
<VersionMajor>3</VersionMajor>
<VersionMinor>4</VersionMinor>
<BuildMajor>3</BuildMajor>
<BuildMinor>0</BuildMinor>
</Version>
<Type>Release</Type>
<Time>May 20 2008, 16:58:11</Time>
<Builder>sqa</Builder>
</Build>
<LanguageID>1036</LanguageID>
<PartNumber>006-A0119-00</PartNumber>
</Application>
<Computer>
<OperatingSystem>Windows Vista Service Pack 1</OperatingSystem>
<Processor>x86, Processor Level: 6, Processors:4, Model: 23 Stepping: 7</Processor>
<RamSize>2097151</RamSize>
</Computer>
<Time>2008-12-12T14:44:53Z</Time>
</Error>

<Error>
<Exception>
<SubId>5</SubId>
<SourceCodeLocation>
<SourceFileName>WIN_UTILITIES.CPP</SourceFileName>
<SourceFileLine>641</SourceFileLine>
</SourceCodeLocation>
<Extra>Windows Error Code: 5
Accès refusé.
Path: C:\ProgramData\GARMIN\Training Center\TCAcct\Debug\CourseTree.bin</Extra>
</Exception>
<Application>
<Name>Garmin Training Center(r)</Name>
<Build>
<Version>
<VersionMajor>3</VersionMajor>
<VersionMinor>4</VersionMinor>
<BuildMajor>3</BuildMajor>
<BuildMinor>0</BuildMinor>
</Version>
<Type>Release</Type>
<Time>May 20 2008, 16:58:11</Time>
<Builder>sqa</Builder>
</Build>
<LanguageID>1036</LanguageID>
<PartNumber>006-A0119-00</PartNumber>
</Application>
<Computer>
<OperatingSystem>Windows Vista Service Pack 1</OperatingSystem>
<Processor>x86, Processor Level: 6, Processors:4, Model: 23 Stepping: 7</Processor>
<RamSize>2097151</RamSize>
</Computer>
<Time>2008-12-12T14:47:45Z</Time>
</Error>

<Error>
<Exception>
<SubId>5</SubId>
<SourceCodeLocation>
<SourceFileName>WIN_UTILITIES.CPP</SourceFileName>
<SourceFileLine>641</SourceFileLine>
</SourceCodeLocation>
<Extra>Windows Error Code: 5
Accès refusé.
Path: C:\ProgramData\GARMIN\Training Center\TCAcct\Debug\CourseTree.bin</Extra>
</Exception>
<Application>
<Name>Garmin Training Center(r)</Name>
<Build>
<Version>
<VersionMajor>3</VersionMajor>
<VersionMinor>4</VersionMinor>
<BuildMajor>3</BuildMajor>
<BuildMinor>0</BuildMinor>
</Version>
<Type>Release</Type>
<Time>May 20 2008, 16:58:11</Time>
<Builder>sqa</Builder>
</Build>
<LanguageID>1036</LanguageID>
<PartNumber>006-A0119-00</PartNumber>
</Application>
<Computer>
<OperatingSystem>Windows Vista Service Pack 1</OperatingSystem>
<Processor>x86, Processor Level: 6, Processors:4, Model: 23 Stepping: 7</Processor>
<RamSize>2097151</RamSize>
</Computer>
<Time>2008-12-12T14:48:04Z</Time>
</Error>

<Error>
<Exception>
<SubId>5</SubId>
<SourceCodeLocation>
<SourceFileName>WIN_UTILITIES.CPP</SourceFileName>
<SourceFileLine>641</SourceFileLine>
</SourceCodeLocation>
<Extra>Windows Error Code: 5
Accès refusé.
Path: C:\ProgramData\GARMIN\Training Center\TCAcct\Debug\CourseTree.bin</Extra>
</Exception>
<Application>
<Name>Garmin Training Center(r)</Name>
<Build>
<Version>
<VersionMajor>3</VersionMajor>
<VersionMinor>4</VersionMinor>
<BuildMajor>3</BuildMajor>
<BuildMinor>0</BuildMinor>
</Version>
<Type>Release</Type>
<Time>May 20 2008, 16:58:11</Time>
<Builder>sqa</Builder>
</Build>
<LanguageID>1036</LanguageID>
<PartNumber>006-A0119-00</PartNumber>
</Application>
<Computer>
<OperatingSystem>Windows Vista Service Pack 1</OperatingSystem>
<Processor>x86, Processor Level: 6, Processors:4, Model: 23 Stepping: 7</Processor>
<RamSize>2097151</RamSize>
</Computer>
<Time>2008-12-12T14:51:06Z</Time>
</Error>

<Error>
<Exception>
<SubId>5</SubId>
<SourceCodeLocation>
<SourceFileName>WIN_UTILITIES.CPP</SourceFileName>
<SourceFileLine>641</SourceFileLine>
</SourceCodeLocation>
<Extra>Windows Error Code: 5
Accès refusé.
Path: C:\ProgramData\GARMIN\Training Center\TCAcct\Debug\CourseTree.bin</Extra>
</Exception>
<Application>
<Name>Garmin Training Center(r)</Name>
<Build>
<Version>
<VersionMajor>3</VersionMajor>
<VersionMinor>4</VersionMinor>
<BuildMajor>3</BuildMajor>
<BuildMinor>0</BuildMinor>
</Version>
<Type>Release</Type>
<Time>May 20 2008, 16:58:11</Time>
<Builder>sqa</Builder>
</Build>
<LanguageID>1036</LanguageID>
<PartNumber>006-A0119-00</PartNumber>
</Application>
<Computer>
<OperatingSystem>Windows Vista Service Pack 1</OperatingSystem>
<Processor>x86, Processor Level: 6, Processors:4, Model: 23 Stepping: 7</Processor>
<RamSize>2097151</RamSize>
</Computer>
<Time>2008-12-12T15:14:32Z</Time>
</Error>

<Error>
<Exception>
<SubId>5</SubId>
<SourceCodeLocation>
<SourceFileName>WIN_UTILITIES.CPP</SourceFileName>
<SourceFileLine>641</SourceFileLine>
</SourceCodeLocation>
<Extra>Windows Error Code: 5
Accès refusé.
Path: C:\ProgramData\GARMIN\Training Center\TCAcct\Debug\CourseTree.bin</Extra>
</Exception>
<Application>
<Name>Garmin Training Center(r)</Name>
<Build>
<Version>
<VersionMajor>3</VersionMajor>
<VersionMinor>4</VersionMinor>
<BuildMajor>3</BuildMajor>
<BuildMinor>0</BuildMinor>
</Version>
<Type>Release</Type>
<Time>May 20 2008, 16:58:11</Time>
<Builder>sqa</Builder>
</Build>
<LanguageID>1036</LanguageID>
<PartNumber>006-A0119-00</PartNumber>
</Application>
<Computer>
<OperatingSystem>Windows Vista Service Pack 1</OperatingSystem>
<Processor>x86, Processor Level: 6, Processors:4, Model: 23 Stepping: 7</Processor>
<RamSize>2097151</RamSize>
</Computer>
<Time>2008-12-12T15:53:07Z</Time>
</Error>

<Error>
<Exception>
<SubId>5</SubId>
<SourceCodeLocation>
<SourceFileName>WIN_UTILITIES.CPP</SourceFileName>
<SourceFileLine>641</SourceFileLine>
</SourceCodeLocation>
<Extra>Windows Error Code: 5
Accès refusé.
Path: C:\ProgramData\GARMIN\Training Center\TCAcct\Debug\CourseTree.bin</Extra>
</Exception>
<Application>
<Name>Garmin Training Center(r)</Name>
<Build>
<Version>
<VersionMajor>3</VersionMajor>
<VersionMinor>4</VersionMinor>
<BuildMajor>3</BuildMajor>
<BuildMinor>0</BuildMinor>
</Version>
<Type>Release</Type>
<Time>May 20 2008, 16:58:11</Time>
<Builder>sqa</Builder>
</Build>
<LanguageID>1036</LanguageID>
<PartNumber>006-A0119-00</PartNumber>
</Application>
<Computer>
<OperatingSystem>Windows Vista Service Pack 1</OperatingSystem>
<Processor>x86, Processor Level: 6, Processors:4, Model: 23 Stepping: 7</Processor>
<RamSize>2097151</RamSize>
</Computer>
<Time>2008-12-12T17:51:30Z</Time>
</Error>

<Error>
<Exception>
<SubId>5</SubId>
<SourceCodeLocation>
<SourceFileName>WIN_UTILITIES.CPP</SourceFileName>
<SourceFileLine>641</SourceFileLine>
</SourceCodeLocation>
<Extra>Windows Error Code: 5
Accès refusé.
Path: C:\ProgramData\GARMIN\Training Center\TCAcct\Debug\CourseTree.bin</Extra>
</Exception>
<Application>
<Name>Garmin Training Center(r)</Name>
<Build>
<Version>
<VersionMajor>3</VersionMajor>
<VersionMinor>4</VersionMinor>
<BuildMajor>3</BuildMajor>
<BuildMinor>0</BuildMinor>
</Version>
<Type>Release</Type>
<Time>May 20 2008, 16:58:11</Time>
<Builder>sqa</Builder>
</Build>
<LanguageID>1036</LanguageID>
<PartNumber>006-A0119-00</PartNumber>
</Application>
<Computer>
<OperatingSystem>Windows Vista Service Pack 1</OperatingSystem>
<Processor>x86, Processor Level: 6, Processors:4, Model: 23 Stepping: 7</Processor>
<RamSize>2097151</RamSize>
</Computer>
<Time>2008-12-12T17:52:44Z</Time>
</Error>

<Error>
<Exception>
<SubId>5</SubId>
<SourceCodeLocation>
<SourceFileName>WIN_UTILITIES.CPP</SourceFileName>
<SourceFileLine>641</SourceFileLine>
</SourceCodeLocation>
<Extra>Windows Error Code: 5
Accès refusé.
Path: C:\ProgramData\GARMIN\Training Center\TCAcct\Debug\CourseTree.bin</Extra>
</Exception>
<Application>
<Name>Garmin Training Center(r)</Name>
<Build>
<Version>
<VersionMajor>3</VersionMajor>
<VersionMinor>4</VersionMinor>
<BuildMajor>3</BuildMajor>
<BuildMinor>0</BuildMinor>
</Version>
<Type>Release</Type>
<Time>May 20 2008, 16:58:11</Time>
<Builder>sqa</Builder>
</Build>
<LanguageID>1036</LanguageID>
<PartNumber>006-A0119-00</PartNumber>
</Application>
<Computer>
<OperatingSystem>Windows Vista Service Pack 1</OperatingSystem>
<Processor>x86, Processor Level: 6, Processors:4, Model: 23 Stepping: 7</Processor>
<RamSize>2097151</RamSize>
</Computer>
<Time>2008-12-12T18:03:14Z</Time>
</Error>

<Error>
<Exception>
<SubId>5</SubId>
<SourceCodeLocation>
<SourceFileName>WIN_UTILITIES.CPP</SourceFileName>
<SourceFileLine>641</SourceFileLine>
</SourceCodeLocation>
<Extra>Windows Error Code: 5
Accès refusé.
Path: C:\ProgramData\GARMIN\Training Center\TCAcct\Debug\CourseTree.bin</Extra>
</Exception>
<Application>
<Name>Garmin Training Center(r)</Name>
<Build>
<Version>
<VersionMajor>3</VersionMajor>
<VersionMinor>4</VersionMinor>
<BuildMajor>3</BuildMajor>
<BuildMinor>0</BuildMinor>
</Version>
<Type>Release</Type>
<Time>May 20 2008, 16:58:11</Time>
<Builder>sqa</Builder>
</Build>
<LanguageID>1036</LanguageID>
<PartNumber>006-A0119-00</PartNumber>
</Application>
<Computer>
<OperatingSystem>Windows Vista Service Pack 1</OperatingSystem>
<Processor>x86, Processor Level: 6, Processors:4, Model: 23 Stepping: 7</Processor>
<RamSize>2097151</RamSize>
</Computer>
<Time>2008-12-12T18:03:54Z</Time>
</Error>

<Error>
<Exception>
<SubId>5</SubId>
<SourceCodeLocation>
<SourceFileName>WIN_UTILITIES.CPP</SourceFileName>
<SourceFileLine>641</SourceFileLine>
</SourceCodeLocation>
<Extra>Windows Error Code: 5
Accès refusé.
Path: C:\ProgramData\GARMIN\Training Center\TCAcct\Debug\CourseTree.bin</Extra>
</Exception>
<Application>
<Name>Garmin Training Center(r)</Name>
<Build>
<Version>
<VersionMajor>3</VersionMajor>
<VersionMinor>4</VersionMinor>
<BuildMajor>3</BuildMajor>
<BuildMinor>0</BuildMinor>
</Version>
<Type>Release</Type>
<Time>May 20 2008, 16:58:11</Time>
<Builder>sqa</Builder>
</Build>
<LanguageID>1036</LanguageID>
<PartNumber>006-A0119-00</PartNumber>
</Application>
<Computer>
<OperatingSystem>Windows Vista Service Pack 1</OperatingSystem>
<Processor>x86, Processor Level: 6, Processors:4, Model: 23 Stepping: 7</Processor>
<RamSize>2097151</RamSize>
</Computer>
<Time>2008-12-12T18:04:33Z</Time>
</Error>

<Error>
<Exception>
<SubId>5</SubId>
<SourceCodeLocation>
<SourceFileName>WIN_UTILITIES.CPP</SourceFileName>
<SourceFileLine>641</SourceFileLine>
</SourceCodeLocation>
<Extra>Windows Error Code: 5
Accès refusé.
Path: C:\ProgramData\GARMIN\Training Center\TCAcct\Debug\CourseTree.bin</Extra>
</Exception>
<Application>
<Name>Garmin Training Center(r)</Name>
<Build>
<Version>
<VersionMajor>3</VersionMajor>
<VersionMinor>4</VersionMinor>
<BuildMajor>3</BuildMajor>
<BuildMinor>0</BuildMinor>
</Version>
<Type>Release</Type>
<Time>May 20 2008, 16:58:11</Time>
<Builder>sqa</Builder>
</Build>
<LanguageID>1036</LanguageID>
<PartNumber>006-A0119-00</PartNumber>
</Application>
<Computer>
<OperatingSystem>Windows Vista Service Pack 1</OperatingSystem>
<Processor>x86, Processor Level: 6, Processors:4, Model: 23 Stepping: 7</Processor>
<RamSize>2097151</RamSize>
</Computer>
<Time>2008-12-13T02:18:25Z</Time>
</Error>

<Error>
<Exception>
<SubId>5</SubId>
<SourceCodeLocation>
<SourceFileName>WIN_UTILITIES.CPP</SourceFileName>
<SourceFileLine>641</SourceFileLine>
</SourceCodeLocation>
<Extra>Windows Error Code: 5
Accès refusé.
Path: C:\ProgramData\GARMIN\Training Center\TCAcct\Debug\CourseTree.bin</Extra>
</Exception>
<Application>
<Name>Garmin Training Center(r)</Name>
<Build>
<Version>
<VersionMajor>3</VersionMajor>
<VersionMinor>4</VersionMinor>
<BuildMajor>3</BuildMajor>
<BuildMinor>0</BuildMinor>
</Version>
<Type>Release</Type>
<Time>May 20 2008, 16:58:11</Time>
<Builder>sqa</Builder>
</Build>
<LanguageID>1036</LanguageID>
<PartNumber>006-A0119-00</PartNumber>
</Application>
<Computer>
<OperatingSystem>Windows Vista Service Pack 1</OperatingSystem>
<Processor>x86, Processor Level: 6, Processors:4, Model: 23 Stepping: 7</Processor>
<RamSize>2097151</RamSize>
</Computer>
<Time>2008-12-13T08:33:01Z</Time>
</Error>

<Error>
<Exception>
<SubId>5</SubId>
<SourceCodeLocation>
<SourceFileName>WIN_UTILITIES.CPP</SourceFileName>
<SourceFileLine>641</SourceFileLine>
</SourceCodeLocation>
<Extra>Windows Error Code: 5
Accès refusé.
Path: C:\ProgramData\GARMIN\Training Center\TCAcct\Debug\CourseTree.bin</Extra>
</Exception>
<Application>
<Name>Garmin Training Center(r)</Name>
<Build>
<Version>
<VersionMajor>3</VersionMajor>
<VersionMinor>4</VersionMinor>
<BuildMajor>3</BuildMajor>
<BuildMinor>0</BuildMinor>
</Version>
<Type>Release</Type>
<Time>May 20 2008, 16:58:11</Time>
<Builder>sqa</Builder>
</Build>
<LanguageID>1036</LanguageID>
<PartNumber>006-A0119-00</PartNumber>
</Application>
<Computer>
<OperatingSystem>Windows Vista Service Pack 1</OperatingSystem>
<Processor>x86, Processor Level: 6, Processors:4, Model: 23 Stepping: 7</Processor>
<RamSize>2097151</RamSize>
</Computer>
<Time>2008-12-13T08:36:42Z</Time>
</Error>

<Error>
<Exception>
<SubId>5</SubId>
<SourceCodeLocation>
<SourceFileName>WIN_UTILITIES.CPP</SourceFileName>
<SourceFileLine>641</SourceFileLine>
</SourceCodeLocation>
<Extra>Windows Error Code: 5
Accès refusé.
Path: C:\ProgramData\GARMIN\Training Center\TCAcct\Debug\CourseTree.bin</Extra>
</Exception>
<Application>
<Name>Garmin Training Center(r)</Name>
<Build>
<Version>
<VersionMajor>3</VersionMajor>
<VersionMinor>4</VersionMinor>
<BuildMajor>3</BuildMajor>
<BuildMinor>0</BuildMinor>
</Version>
<Type>Release</Type>
<Time>May 20 2008, 16:58:11</Time>
<Builder>sqa</Builder>
</Build>
<LanguageID>1036</LanguageID>
<PartNumber>006-A0119-00</PartNumber>
</Application>
<Computer>
<OperatingSystem>Windows Vista Service Pack 1</OperatingSystem>
<Processor>x86, Processor Level: 6, Processors:4, Model: 23 Stepping: 7</Processor>
<RamSize>2097151</RamSize>
</Computer>
<Time>2008-12-13T08:37:21Z</Time>
</Error>

<Error>
<Exception>
<SubId>5</SubId>
<SourceCodeLocation>
<SourceFileName>WIN_UTILITIES.CPP</SourceFileName>
<SourceFileLine>641</SourceFileLine>
</SourceCodeLocation>
<Extra>Windows Error Code: 5
Accès refusé.
Path: C:\ProgramData\GARMIN\Training Center\TCAcct\Debug\CourseTree.bin</Extra>
</Exception>
<Application>
<Name>Garmin Training Center(r)</Name>
<Build>
<Version>
<VersionMajor>3</VersionMajor>
<VersionMinor>4</VersionMinor>
<BuildMajor>3</BuildMajor>
<BuildMinor>0</BuildMinor>
</Version>
<Type>Release</Type>
<Time>May 20 2008, 16:58:11</Time>
<Builder>sqa</Builder>
</Build>
<LanguageID>1036</LanguageID>
<PartNumber>006-A0119-00</PartNumber>
</Application>
<Computer>
<OperatingSystem>Windows Vista Service Pack 1</OperatingSystem>
<Processor>x86, Processor Level: 6, Processors:4, Model: 23 Stepping: 7</Processor>
<RamSize>2097151</RamSize>
</Computer>
<Time>2008-12-13T08:37:40Z</Time>
</Error>

<Error>
<Exception>
<SubId>5</SubId>
<SourceCodeLocation>
<SourceFileName>WIN_UTILITIES.CPP</SourceFileName>
<SourceFileLine>641</SourceFileLine>
</SourceCodeLocation>
<Extra>Windows Error Code: 5
Accès refusé.
Path: C:\ProgramData\GARMIN\Training Center\TCAcct\Debug\CourseTree.bin</Extra>
</Exception>
<Application>
<Name>Garmin Training Center(r)</Name>
<Build>
<Version>
<VersionMajor>3</VersionMajor>
<VersionMinor>4</VersionMinor>
<BuildMajor>3</BuildMajor>
<BuildMinor>0</BuildMinor>
</Version>
<Type>Release</Type>
<Time>May 20 2008, 16:58:11</Time>
<Builder>sqa</Builder>
</Build>
<LanguageID>1036</LanguageID>
<PartNumber>006-A0119-00</PartNumber>
</Application>
<Computer>
<OperatingSystem>Windows Vista Service Pack 1</OperatingSystem>
<Processor>x86, Processor Level: 6, Processors:4, Model: 23 Stepping: 7</Processor>
<RamSize>2097151</RamSize>
</Computer>
<Time>2008-12-13T08:41:01Z</Time>
</Error>

<Error>
<Exception>
<SubId>5</SubId>
<SourceCodeLocation>
<SourceFileName>WIN_UTILITIES.CPP</SourceFileName>
<SourceFileLine>641</SourceFileLine>
</SourceCodeLocation>
<Extra>Windows Error Code: 5
Accès refusé.
Path: C:\ProgramData\GARMIN\Training Center\TCAcct\Debug\CourseTree.bin</Extra>
</Exception>
<Application>
<Name>Garmin Training Center(r)</Name>
<Build>
<Version>
<VersionMajor>3</VersionMajor>
<VersionMinor>4</VersionMinor>
<BuildMajor>3</BuildMajor>
<BuildMinor>0</BuildMinor>
</Version>
<Type>Release</Type>
<Time>May 20 2008, 16:58:11</Time>
<Builder>sqa</Builder>
</Build>
<LanguageID>1036</LanguageID>
<PartNumber>006-A0119-00</PartNumber>
</Application>
<Computer>
<OperatingSystem>Windows Vista Service Pack 1</OperatingSystem>
<Processor>x86, Processor Level: 6, Processors:4, Model: 23 Stepping: 7</Processor>
<RamSize>2097151</RamSize>
</Computer>
<Time>2008-12-13T08:41:48Z</Time>
</Error>

<Error>
<Exception>
<SubId>5</SubId>
<SourceCodeLocation>
<SourceFileName>WIN_UTILITIES.CPP</SourceFileName>
<SourceFileLine>641</SourceFileLine>
</SourceCodeLocation>
<Extra>Windows Error Code: 5
Accès refusé.
Path: C:\ProgramData\GARMIN\Training Center\TCAcct\Debug\CourseTree.bin</Extra>
</Exception>
<Application>
<Name>Garmin Training Center(r)</Name>
<Build>
<Version>
<VersionMajor>3</VersionMajor>
<VersionMinor>4</VersionMinor>
<BuildMajor>3</BuildMajor>
<BuildMinor>0</BuildMinor>
</Version>
<Type>Release</Type>
<Time>May 20 2008, 16:58:11</Time>
<Builder>sqa</Builder>
</Build>
<LanguageID>1036</LanguageID>
<PartNumber>006-A0119-00</PartNumber>
</Application>
<Computer>
<OperatingSystem>Windows Vista Service Pack 1</OperatingSystem>
<Processor>x86, Processor Level: 6, Processors:4, Model: 23 Stepping: 7</Processor>
<RamSize>2097151</RamSize>
</Computer>
<Time>2008-12-13T12:46:34Z</Time>
</Error>

<Error>
<Exception>
<SubId>5</SubId>
<SourceCodeLocation>
<SourceFileName>WIN_UTILITIES.CPP</SourceFileName>
<SourceFileLine>641</SourceFileLine>
</SourceCodeLocation>
<Extra>Windows Error Code: 5
Accès refusé.
Path: C:\ProgramData\GARMIN\Training Center\TCAcct\Debug\CourseTree.bin</Extra>
</Exception>
<Application>
<Name>Garmin Training Center(r)</Name>
<Build>
<Version>
<VersionMajor>3</VersionMajor>
<VersionMinor>4</VersionMinor>
<BuildMajor>3</BuildMajor>
<BuildMinor>0</BuildMinor>
</Version>
<Type>Release</Type>
<Time>May 20 2008, 16:58:11</Time>
<Builder>sqa</Builder>
</Build>
<LanguageID>1036</LanguageID>
<PartNumber>006-A0119-00</PartNumber>
</Application>
<Computer>
<OperatingSystem>Windows Vista Service Pack 1</OperatingSystem>
<Processor>x86, Processor Level: 6, Processors:4, Model: 23 Stepping: 7</Processor>
<RamSize>2097151</RamSize>
</Computer>
<Time>2008-12-13T12:54:39Z</Time>
</Error>

</ErrorReport>


Si y a quelqu'un qui peut décoder... sachant que j'ai déjà désinstallé, réinstallé tout, et que ça donne la même chose... C'est vilain, hein?

MessagePublié: 13 Déc 2008, 16:27
par corto
....

MessagePublié: 14 Déc 2008, 15:09
par Eric_d_Orient_Alp
commence par la désinstaller et la réinstaller

MessagePublié: 14 Déc 2008, 15:17
par corto
....

MessagePublié: 14 Déc 2008, 18:55
par Eric_d_Orient_Alp
corto a écrit:
Eric_d_Orient_Alp a écrit:commence par la désinstaller et la réinstaller


Tu es fin toi, ou alors tu as pas tout lu!!


faut dire que tu nous mets ce que tu as fait, tout à la fin, d'un message où il n'y a que du code XML


va faire un tour par là
http://www.commentcamarche.net/forum/af ... pplication

MessagePublié: 18 Déc 2008, 18:43
par Papillon
Super ton lien... j'y suis allée et leurs conseils n'ont pas marché. Je continue mes recherche!

MessagePublié: 18 Déc 2008, 18:44
par corto
....

MessagePublié: 18 Déc 2008, 19:33
par Papillon
Le port n'a pas changé...

Re: au secour, training center en vrac!

MessagePublié: 18 Déc 2008, 22:27
par gdraid
Papillon a écrit:Bon, j'ai un soucis... Training center de Garmin refuse de fonctionner!

Une fenêtre s'ouvre au démarrage en me disant qu'il y a un problème avec l'application

Puis

<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
<ErrorReport xmlns="http://www.garmin.com/xmlschemas/ApplicationErrors/v1">

<Error>
<Exception>
<SourceCodeLocation>
<SourceFileName>HISTORYTREE.CPP</SourceFileName>
<SourceFileLine>217</SourceFileLine>
</SourceCodeLocation>
<Extra>
Unable to locate main folder of type: 3
User's Main Folders are:
Name: Course à pied Type: 0
Name: Course à pied Type: 0
Name: Cyclisme Type: 1
Name: Autre Type: 2</Extra>
</Exception>
<Application>
<Name>Garmin Training Center(r)</Name>
<Build>
<Version>
<VersionMajor>3</VersionMajor>
<VersionMinor>4</VersionMinor>
<BuildMajor>3</BuildMajor>
<BuildMinor>0</BuildMinor>
</Version>
<Type>Release</Type>
<Time>May 20 2008, 16:58:11</Time>
<Builder>sqa</Builder>
</Build>
<LanguageID>1036</LanguageID>
<PartNumber>006-A0119-00</PartNumber>
</Application>
<Computer>
<OperatingSystem>Windows Vista Service Pack 1</OperatingSystem>
<Processor>x86, Processor Level: 6, Processors:4, Model: 23 Stepping: 7</Processor>
<RamSize>2097151</RamSize>
</Computer>
<Time>2008-09-20T10:52:19Z</Time>
</Error>

<Error>
<Exception>
<SourceCodeLocation>
<SourceFileName>IOU_USBLINKIMPL.CPP</SourceFileName>
<SourceFileLine>201</SourceFileLine>
</SourceCodeLocation>
<StackTrace>
<ReturnAddress>2000700139</ReturnAddress>
<ReturnAddress>9497758</ReturnAddress>
<ReturnAddress>6107730</ReturnAddress>
<ReturnAddress>4205101</ReturnAddress>
<ReturnAddress>216826860</ReturnAddress>
<ReturnAddress>2106283862</ReturnAddress>
<ReturnAddress>74943752</ReturnAddress>
<ReturnAddress>267437707</ReturnAddress>
<ReturnAddress>251670714</ReturnAddress>
<ReturnAddress>33364867</ReturnAddress>
<ReturnAddress>413230080</ReturnAddress>
<ReturnAddress>2332033024</ReturnAddress>
<ReturnAddress>1334387784</ReturnAddress>
<ReturnAddress>138921740</ReturnAddress>
</StackTrace>
</Exception>
<Application>
<Name>Garmin Training Center(r)</Name>
<Build>
<Version>
<VersionMajor>3</VersionMajor>
<VersionMinor>4</VersionMinor>
<BuildMajor>3</BuildMajor>
<BuildMinor>0</BuildMinor>
</Version>
<Type>Release</Type>
<Time>May 20 2008, 16:58:11</Time>
<Builder>sqa</Builder>
</Build>
<LanguageID>1036</LanguageID>
<PartNumber>006-A0119-00</PartNumber>
</Application>
<Computer>
<OperatingSystem>Windows Vista Service Pack 1</OperatingSystem>
<Processor>x86, Processor Level: 6, Processors:4, Model: 23 Stepping: 7</Processor>
<RamSize>2097151</RamSize>
</Computer>
<Time>2008-10-09T11:11:04Z</Time>
</Error>

<Error>
<Exception>
<SourceCodeLocation>
<SourceFileName>IOU_USBLINKIMPL.CPP</SourceFileName>
<SourceFileLine>201</SourceFileLine>
</SourceCodeLocation>
<StackTrace>
<ReturnAddress>1984381675</ReturnAddress>
<ReturnAddress>9497758</ReturnAddress>
<ReturnAddress>6107730</ReturnAddress>
<ReturnAddress>4205101</ReturnAddress>
<ReturnAddress>216826860</ReturnAddress>
<ReturnAddress>2106283862</ReturnAddress>
<ReturnAddress>74943752</ReturnAddress>
<ReturnAddress>267437707</ReturnAddress>
<ReturnAddress>251670714</ReturnAddress>
<ReturnAddress>33364867</ReturnAddress>
<ReturnAddress>413230080</ReturnAddress>
<ReturnAddress>2332033024</ReturnAddress>
<ReturnAddress>1334387784</ReturnAddress>
<ReturnAddress>138921740</ReturnAddress>
</StackTrace>
</Exception>
<Application>
<Name>Garmin Training Center(r)</Name>
<Build>
<Version>
<VersionMajor>3</VersionMajor>
<VersionMinor>4</VersionMinor>
<BuildMajor>3</BuildMajor>
<BuildMinor>0</BuildMinor>
</Version>
<Type>Release</Type>
<Time>May 20 2008, 16:58:11</Time>
<Builder>sqa</Builder>
</Build>
<LanguageID>1036</LanguageID>
<PartNumber>006-A0119-00</PartNumber>
</Application>
<Computer>
<OperatingSystem>Windows Vista Service Pack 1</OperatingSystem>
<Processor>x86, Processor Level: 6, Processors:4, Model: 23 Stepping: 7</Processor>
<RamSize>2097151</RamSize>
</Computer>
<Time>2008-10-15T05:19:06Z</Time>
</Error>

<Error>
<Exception>
<SourceCodeLocation>
<SourceFileName>IOU_USBLINKIMPL.CPP</SourceFileName>
<SourceFileLine>201</SourceFileLine>
</SourceCodeLocation>
<StackTrace>
<ReturnAddress>1986478827</ReturnAddress>
<ReturnAddress>9497758</ReturnAddress>
<ReturnAddress>6107730</ReturnAddress>
<ReturnAddress>4205101</ReturnAddress>
<ReturnAddress>216826860</ReturnAddress>
<ReturnAddress>2106283862</ReturnAddress>
<ReturnAddress>74943752</ReturnAddress>
<ReturnAddress>267437707</ReturnAddress>
<ReturnAddress>251670714</ReturnAddress>
<ReturnAddress>33364867</ReturnAddress>
<ReturnAddress>413230080</ReturnAddress>
<ReturnAddress>2332033024</ReturnAddress>
<ReturnAddress>1334387784</ReturnAddress>
<ReturnAddress>138921740</ReturnAddress>
</StackTrace>
</Exception>
<Application>
<Name>Garmin Training Center(r)</Name>
<Build>
<Version>
<VersionMajor>3</VersionMajor>
<VersionMinor>4</VersionMinor>
<BuildMajor>3</BuildMajor>
<BuildMinor>0</BuildMinor>
</Version>
<Type>Release</Type>
<Time>May 20 2008, 16:58:11</Time>
<Builder>sqa</Builder>
</Build>
<LanguageID>1036</LanguageID>
<PartNumber>006-A0119-00</PartNumber>
</Application>
<Computer>
<OperatingSystem>Windows Vista Service Pack 1</OperatingSystem>
<Processor>x86, Processor Level: 6, Processors:4, Model: 23 Stepping: 7</Processor>
<RamSize>2097151</RamSize>
</Computer>
<Time>2008-12-03T08:30:52Z</Time>
</Error>

<Error>
<Exception>
<SubId>0</SubId>
<SourceCodeLocation>
<SourceFileName>AFX_TASKBARICON.HPP</SourceFileName>
<SourceFileLine>60</SourceFileLine>
</SourceCodeLocation>
<Extra>Windows Error Code: 0
</Extra>
</Exception>
<Application>
<Name>gStart</Name>
<Build>
<Version>
<VersionMajor>2</VersionMajor>
<VersionMinor>3</VersionMinor>
<BuildMajor>0</BuildMajor>
<BuildMinor>0</BuildMinor>
</Version>
<Type>Release</Type>
<Time>Sep 6 2006, 10:24:11</Time>
<Builder>SQA</Builder>
</Build>
<LanguageID>1036</LanguageID>
<PartNumber>006-A0128-00</PartNumber>
</Application>
<Computer>
<OperatingSystem>WIN32 Windows Platform, Major Version: 6, Minor Version: 0 Service Pack 1</OperatingSystem>
<Processor>Pentium Pro or Pentium II</Processor>
<RamSize>2097151</RamSize>
</Computer>
<Time>2008-12-10T05:50:42Z</Time>
</Error>

<Error>
<Exception>
<SubId>5</SubId>
<SourceCodeLocation>
<SourceFileName>WIN_UTILITIES.CPP</SourceFileName>
<SourceFileLine>641</SourceFileLine>
</SourceCodeLocation>
<Extra>Windows Error Code: 5
Accès refusé.
Path: C:\ProgramData\GARMIN\Training Center\TCAcct\Debug\CourseTree.bin</Extra>
</Exception>
<Application>
<Name>Garmin Training Center(r)</Name>
<Build>
<Version>
<VersionMajor>3</VersionMajor>
<VersionMinor>4</VersionMinor>
<BuildMajor>3</BuildMajor>
<BuildMinor>0</BuildMinor>
</Version>
<Type>Release</Type>
<Time>May 20 2008, 16:58:11</Time>
<Builder>sqa</Builder>
</Build>
<LanguageID>1036</LanguageID>
<PartNumber>006-A0119-00</PartNumber>
</Application>
<Computer>
<OperatingSystem>Windows Vista Service Pack 1</OperatingSystem>
<Processor>x86, Processor Level: 6, Processors:4, Model: 23 Stepping: 7</Processor>
<RamSize>2097151</RamSize>
</Computer>
<Time>2008-12-12T07:47:14Z</Time>
</Error>

<Error>
<Exception>
<SubId>5</SubId>
<SourceCodeLocation>
<SourceFileName>WIN_UTILITIES.CPP</SourceFileName>
<SourceFileLine>641</SourceFileLine>
</SourceCodeLocation>
<Extra>Windows Error Code: 5
Accès refusé.
Path: C:\ProgramData\GARMIN\Training Center\TCAcct\Debug\CourseTree.bin</Extra>
</Exception>
<Application>
<Name>Garmin Training Center(r)</Name>
<Build>
<Version>
<VersionMajor>3</VersionMajor>
<VersionMinor>4</VersionMinor>
<BuildMajor>3</BuildMajor>
<BuildMinor>0</BuildMinor>
</Version>
<Type>Release</Type>
<Time>May 20 2008, 16:58:11</Time>
<Builder>sqa</Builder>
</Build>
<LanguageID>1036</LanguageID>
<PartNumber>006-A0119-00</PartNumber>
</Application>
<Computer>
<OperatingSystem>Windows Vista Service Pack 1</OperatingSystem>
<Processor>x86, Processor Level: 6, Processors:4, Model: 23 Stepping: 7</Processor>
<RamSize>2097151</RamSize>
</Computer>
<Time>2008-12-12T14:44:53Z</Time>
</Error>

<Error>
<Exception>
<SubId>5</SubId>
<SourceCodeLocation>
<SourceFileName>WIN_UTILITIES.CPP</SourceFileName>
<SourceFileLine>641</SourceFileLine>
</SourceCodeLocation>
<Extra>Windows Error Code: 5
Accès refusé.
Path: C:\ProgramData\GARMIN\Training Center\TCAcct\Debug\CourseTree.bin</Extra>
</Exception>
<Application>
<Name>Garmin Training Center(r)</Name>
<Build>
<Version>
<VersionMajor>3</VersionMajor>
<VersionMinor>4</VersionMinor>
<BuildMajor>3</BuildMajor>
<BuildMinor>0</BuildMinor>
</Version>
<Type>Release</Type>
<Time>May 20 2008, 16:58:11</Time>
<Builder>sqa</Builder>
</Build>
<LanguageID>1036</LanguageID>
<PartNumber>006-A0119-00</PartNumber>
</Application>
<Computer>
<OperatingSystem>Windows Vista Service Pack 1</OperatingSystem>
<Processor>x86, Processor Level: 6, Processors:4, Model: 23 Stepping: 7</Processor>
<RamSize>2097151</RamSize>
</Computer>
<Time>2008-12-12T14:47:45Z</Time>
</Error>

<Error>
<Exception>
<SubId>5</SubId>
<SourceCodeLocation>
<SourceFileName>WIN_UTILITIES.CPP</SourceFileName>
<SourceFileLine>641</SourceFileLine>
</SourceCodeLocation>
<Extra>Windows Error Code: 5
Accès refusé.
Path: C:\ProgramData\GARMIN\Training Center\TCAcct\Debug\CourseTree.bin</Extra>
</Exception>
<Application>
<Name>Garmin Training Center(r)</Name>
<Build>
<Version>
<VersionMajor>3</VersionMajor>
<VersionMinor>4</VersionMinor>
<BuildMajor>3</BuildMajor>
<BuildMinor>0</BuildMinor>
</Version>
<Type>Release</Type>
<Time>May 20 2008, 16:58:11</Time>
<Builder>sqa</Builder>
</Build>
<LanguageID>1036</LanguageID>
<PartNumber>006-A0119-00</PartNumber>
</Application>
<Computer>
<OperatingSystem>Windows Vista Service Pack 1</OperatingSystem>
<Processor>x86, Processor Level: 6, Processors:4, Model: 23 Stepping: 7</Processor>
<RamSize>2097151</RamSize>
</Computer>
<Time>2008-12-12T14:48:04Z</Time>
</Error>

<Error>
<Exception>
<SubId>5</SubId>
<SourceCodeLocation>
<SourceFileName>WIN_UTILITIES.CPP</SourceFileName>
<SourceFileLine>641</SourceFileLine>
</SourceCodeLocation>
<Extra>Windows Error Code: 5
Accès refusé.
Path: C:\ProgramData\GARMIN\Training Center\TCAcct\Debug\CourseTree.bin</Extra>
</Exception>
<Application>
<Name>Garmin Training Center(r)</Name>
<Build>
<Version>
<VersionMajor>3</VersionMajor>
<VersionMinor>4</VersionMinor>
<BuildMajor>3</BuildMajor>
<BuildMinor>0</BuildMinor>
</Version>
<Type>Release</Type>
<Time>May 20 2008, 16:58:11</Time>
<Builder>sqa</Builder>
</Build>
<LanguageID>1036</LanguageID>
<PartNumber>006-A0119-00</PartNumber>
</Application>
<Computer>
<OperatingSystem>Windows Vista Service Pack 1</OperatingSystem>
<Processor>x86, Processor Level: 6, Processors:4, Model: 23 Stepping: 7</Processor>
<RamSize>2097151</RamSize>
</Computer>
<Time>2008-12-12T14:51:06Z</Time>
</Error>

<Error>
<Exception>
<SubId>5</SubId>
<SourceCodeLocation>
<SourceFileName>WIN_UTILITIES.CPP</SourceFileName>
<SourceFileLine>641</SourceFileLine>
</SourceCodeLocation>
<Extra>Windows Error Code: 5
Accès refusé.
Path: C:\ProgramData\GARMIN\Training Center\TCAcct\Debug\CourseTree.bin</Extra>
</Exception>
<Application>
<Name>Garmin Training Center(r)</Name>
<Build>
<Version>
<VersionMajor>3</VersionMajor>
<VersionMinor>4</VersionMinor>
<BuildMajor>3</BuildMajor>
<BuildMinor>0</BuildMinor>
</Version>
<Type>Release</Type>
<Time>May 20 2008, 16:58:11</Time>
<Builder>sqa</Builder>
</Build>
<LanguageID>1036</LanguageID>
<PartNumber>006-A0119-00</PartNumber>
</Application>
<Computer>
<OperatingSystem>Windows Vista Service Pack 1</OperatingSystem>
<Processor>x86, Processor Level: 6, Processors:4, Model: 23 Stepping: 7</Processor>
<RamSize>2097151</RamSize>
</Computer>
<Time>2008-12-12T15:14:32Z</Time>
</Error>

<Error>
<Exception>
<SubId>5</SubId>
<SourceCodeLocation>
<SourceFileName>WIN_UTILITIES.CPP</SourceFileName>
<SourceFileLine>641</SourceFileLine>
</SourceCodeLocation>
<Extra>Windows Error Code: 5
Accès refusé.
Path: C:\ProgramData\GARMIN\Training Center\TCAcct\Debug\CourseTree.bin</Extra>
</Exception>
<Application>
<Name>Garmin Training Center(r)</Name>
<Build>
<Version>
<VersionMajor>3</VersionMajor>
<VersionMinor>4</VersionMinor>
<BuildMajor>3</BuildMajor>
<BuildMinor>0</BuildMinor>
</Version>
<Type>Release</Type>
<Time>May 20 2008, 16:58:11</Time>
<Builder>sqa</Builder>
</Build>
<LanguageID>1036</LanguageID>
<PartNumber>006-A0119-00</PartNumber>
</Application>
<Computer>
<OperatingSystem>Windows Vista Service Pack 1</OperatingSystem>
<Processor>x86, Processor Level: 6, Processors:4, Model: 23 Stepping: 7</Processor>
<RamSize>2097151</RamSize>
</Computer>
<Time>2008-12-12T15:53:07Z</Time>
</Error>

<Error>
<Exception>
<SubId>5</SubId>
<SourceCodeLocation>
<SourceFileName>WIN_UTILITIES.CPP</SourceFileName>
<SourceFileLine>641</SourceFileLine>
</SourceCodeLocation>
<Extra>Windows Error Code: 5
Accès refusé.
Path: C:\ProgramData\GARMIN\Training Center\TCAcct\Debug\CourseTree.bin</Extra>
</Exception>
<Application>
<Name>Garmin Training Center(r)</Name>
<Build>
<Version>
<VersionMajor>3</VersionMajor>
<VersionMinor>4</VersionMinor>
<BuildMajor>3</BuildMajor>
<BuildMinor>0</BuildMinor>
</Version>
<Type>Release</Type>
<Time>May 20 2008, 16:58:11</Time>
<Builder>sqa</Builder>
</Build>
<LanguageID>1036</LanguageID>
<PartNumber>006-A0119-00</PartNumber>
</Application>
<Computer>
<OperatingSystem>Windows Vista Service Pack 1</OperatingSystem>
<Processor>x86, Processor Level: 6, Processors:4, Model: 23 Stepping: 7</Processor>


<RamSize>2097151</RamSize>
</Computer>
<Time>2008-12-12T17:51:30Z</Time>
</Error>

<Error>
<Exception>
<SubId>5</SubId>
<SourceCodeLocation>
<SourceFileName>WIN_UTILITIES.CPP</SourceFileName>
<SourceFileLine>641</SourceFileLine>
</SourceCodeLocation>
<Extra>Windows Error Code: 5
Accès refusé.
Path: C:\ProgramData\GARMIN\Training Center\TCAcct\Debug\CourseTree.bin</Extra>
</Exception>
<Application>
<Name>Garmin Training Center(r)</Name>
<Build>
<Version>
<VersionMajor>3</VersionMajor>
<VersionMinor>4</VersionMinor>
<BuildMajor>3</BuildMajor>
<BuildMinor>0</BuildMinor>
</Version>
<Type>Release</Type>
<Time>May 20 2008, 16:58:11</Time>
<Builder>sqa</Builder>
</Build>
<LanguageID>1036</LanguageID>
<PartNumber>006-A0119-00</PartNumber>
</Application>
<Computer>
<OperatingSystem>Windows Vista Service Pack 1</OperatingSystem>
<Processor>x86, Processor Level: 6, Processors:4, Model: 23 Stepping: 7</Processor>
<RamSize>2097151</RamSize>
</Computer>
<Time>2008-12-12T17:52:44Z</Time>
</Error>

<Error>
<Exception>
<SubId>5</SubId>
<SourceCodeLocation>
<SourceFileName>WIN_UTILITIES.CPP</SourceFileName>
<SourceFileLine>641</SourceFileLine>
</SourceCodeLocation>
<Extra>Windows Error Code: 5
Accès refusé.
Path: C:\ProgramData\GARMIN\Training Center\TCAcct\Debug\CourseTree.bin</Extra>
</Exception>
<Application>
<Name>Garmin Training Center(r)</Name>
<Build>
<Version>
<VersionMajor>3</VersionMajor>
<VersionMinor>4</VersionMinor>
<BuildMajor>3</BuildMajor>
<BuildMinor>0</BuildMinor>
</Version>
<Type>Release</Type>
<Time>May 20 2008, 16:58:11</Time>
<Builder>sqa</Builder>
</Build>
<LanguageID>1036</LanguageID>
<PartNumber>006-A0119-00</PartNumber>
</Application>
<Computer>
<OperatingSystem>Windows Vista Service Pack 1</OperatingSystem>
<Processor>x86, Processor Level: 6, Processors:4, Model: 23 Stepping: 7</Processor>
<RamSize>2097151</RamSize>
</Computer>
<Time>2008-12-12T18:03:14Z</Time>
</Error>

<Error>
<Exception>
<SubId>5</SubId>
<SourceCodeLocation>
<SourceFileName>WIN_UTILITIES.CPP</SourceFileName>
<SourceFileLine>641</SourceFileLine>
</SourceCodeLocation>
<Extra>Windows Error Code: 5
Accès refusé.
Path: C:\ProgramData\GARMIN\Training Center\TCAcct\Debug\CourseTree.bin</Extra>
</Exception>
<Application>
<Name>Garmin Training Center(r)</Name>
<Build>
<Version>
<VersionMajor>3</VersionMajor>
<VersionMinor>4</VersionMinor>
<BuildMajor>3</BuildMajor>
<BuildMinor>0</BuildMinor>
</Version>
<Type>Release</Type>
<Time>May 20 2008, 16:58:11</Time>
<Builder>sqa</Builder>
</Build>
<LanguageID>1036</LanguageID>
<PartNumber>006-A0119-00</PartNumber>
</Application>
<Computer>
<OperatingSystem>Windows Vista Service Pack 1</OperatingSystem>
<Processor>x86, Processor Level: 6, Processors:4, Model: 23 Stepping: 7</Processor>
<RamSize>2097151</RamSize>
</Computer>
<Time>2008-12-12T18:03:54Z</Time>
</Error>

<Error>
<Exception>
<SubId>5</SubId>
<SourceCodeLocation>
<SourceFileName>WIN_UTILITIES.CPP</SourceFileName>
<SourceFileLine>641</SourceFileLine>
</SourceCodeLocation>
<Extra>Windows Error Code: 5
Accès refusé.
Path: C:\ProgramData\GARMIN\Training Center\TCAcct\Debug\CourseTree.bin</Extra>
</Exception>
<Application>
<Name>Garmin Training Center(r)</Name>
<Build>
<Version>
<VersionMajor>3</VersionMajor>
<VersionMinor>4</VersionMinor>
<BuildMajor>3</BuildMajor>
<BuildMinor>0</BuildMinor>
</Version>
<Type>Release</Type>
<Time>May 20 2008, 16:58:11</Time>
<Builder>sqa</Builder>
</Build>
<LanguageID>1036</LanguageID>
<PartNumber>006-A0119-00</PartNumber>
</Application>
<Computer>
<OperatingSystem>Windows Vista Service Pack 1</OperatingSystem>
<Processor>x86, Processor Level: 6, Processors:4, Model: 23 Stepping: 7</Processor>
<RamSize>2097151</RamSize>
</Computer>
<Time>2008-12-12T18:04:33Z</Time>
</Error>

<Error>
<Exception>
<SubId>5</SubId>
<SourceCodeLocation>
<SourceFileName>WIN_UTILITIES.CPP</SourceFileName>
<SourceFileLine>641</SourceFileLine>
</SourceCodeLocation>
<Extra>Windows Error Code: 5
Accès refusé.
Path: C:\ProgramData\GARMIN\Training Center\TCAcct\Debug\CourseTree.bin</Extra>
</Exception>
<Application>
<Name>Garmin Training Center(r)</Name>
<Build>
<Version>
<VersionMajor>3</VersionMajor>
<VersionMinor>4</VersionMinor>
<BuildMajor>3</BuildMajor>
<BuildMinor>0</BuildMinor>
</Version>
<Type>Release</Type>
<Time>May 20 2008, 16:58:11</Time>
<Builder>sqa</Builder>
</Build>
<LanguageID>1036</LanguageID>
<PartNumber>006-A0119-00</PartNumber>
</Application>
<Computer>
<OperatingSystem>Windows Vista Service Pack 1</OperatingSystem>
<Processor>x86, Processor Level: 6, Processors:4, Model: 23 Stepping: 7</Processor>
<RamSize>2097151</RamSize>
</Computer>
<Time>2008-12-13T02:18:25Z</Time>
</Error>

<Error>
<Exception>
<SubId>5</SubId>
<SourceCodeLocation>
<SourceFileName>WIN_UTILITIES.CPP</SourceFileName>
<SourceFileLine>641</SourceFileLine>
</SourceCodeLocation>
<Extra>Windows Error Code: 5
Accès refusé.
Path: C:\ProgramData\GARMIN\Training Center\TCAcct\Debug\CourseTree.bin</Extra>
</Exception>
<Application>
<Name>Garmin Training Center(r)</Name>
<Build>
<Version>
<VersionMajor>3</VersionMajor>
<VersionMinor>4</VersionMinor>
<BuildMajor>3</BuildMajor>
<BuildMinor>0</BuildMinor>
</Version>
<Type>Release</Type>
<Time>May 20 2008, 16:58:11</Time>
<Builder>sqa</Builder>
</Build>
<LanguageID>1036</LanguageID>
<PartNumber>006-A0119-00</PartNumber>
</Application>
<Computer>
<OperatingSystem>Windows Vista Service Pack 1</OperatingSystem>
<Processor>x86, Processor Level: 6, Processors:4, Model: 23 Stepping: 7</Processor>
<RamSize>2097151</RamSize>
</Computer>
<Time>2008-12-13T08:33:01Z</Time>
</Error>

<Error>
<Exception>
<SubId>5</SubId>
<SourceCodeLocation>
<SourceFileName>WIN_UTILITIES.CPP</SourceFileName>
<SourceFileLine>641</SourceFileLine>
</SourceCodeLocation>
<Extra>Windows Error Code: 5
Accès refusé.
Path: C:\ProgramData\GARMIN\Training Center\TCAcct\Debug\CourseTree.bin</Extra>
</Exception>
<Application>
<Name>Garmin Training Center(r)</Name>
<Build>
<Version>
<VersionMajor>3</VersionMajor>
<VersionMinor>4</VersionMinor>
<BuildMajor>3</BuildMajor>
<BuildMinor>0</BuildMinor>
</Version>
<Type>Release</Type>
<Time>May 20 2008, 16:58:11</Time>
<Builder>sqa</Builder>
</Build>
<LanguageID>1036</LanguageID>
<PartNumber>006-A0119-00</PartNumber>
</Application>
<Computer>
<OperatingSystem>Windows Vista Service Pack 1</OperatingSystem>
<Processor>x86, Processor Level: 6, Processors:4, Model: 23 Stepping: 7</Processor>
<RamSize>2097151</RamSize>
</Computer>
<Time>2008-12-13T08:36:42Z</Time>
</Error>

<Error>
<Exception>
<SubId>5</SubId>
<SourceCodeLocation>
<SourceFileName>WIN_UTILITIES.CPP</SourceFileName>
<SourceFileLine>641</SourceFileLine>
</SourceCodeLocation>
<Extra>Windows Error Code: 5
Accès refusé.
Path: C:\ProgramData\GARMIN\Training Center\TCAcct\Debug\CourseTree.bin</Extra>
</Exception>
<Application>
<Name>Garmin Training Center(r)</Name>
<Build>
<Version>
<VersionMajor>3</VersionMajor>
<VersionMinor>4</VersionMinor>
<BuildMajor>3</BuildMajor>
<BuildMinor>0</BuildMinor>
</Version>
<Type>Release</Type>
<Time>May 20 2008, 16:58:11</Time>
<Builder>sqa</Builder>
</Build>
<LanguageID>1036</LanguageID>
<PartNumber>006-A0119-00</PartNumber>
</Application>
<Computer>
<OperatingSystem>Windows Vista Service Pack 1</OperatingSystem>
<Processor>x86, Processor Level: 6, Processors:4, Model: 23 Stepping: 7</Processor>
<RamSize>2097151</RamSize>
</Computer>
<Time>2008-12-13T08:37:21Z</Time>
</Error>

<Error>
<Exception>
<SubId>5</SubId>
<SourceCodeLocation>
<SourceFileName>WIN_UTILITIES.CPP</SourceFileName>
<SourceFileLine>641</SourceFileLine>
</SourceCodeLocation>
<Extra>Windows Error Code: 5
Accès refusé.
Path: C:\ProgramData\GARMIN\Training Center\TCAcct\Debug\CourseTree.bin</Extra>
</Exception>
<Application>
<Name>Garmin Training Center(r)</Name>
<Build>
<Version>
<VersionMajor>3</VersionMajor>
<VersionMinor>4</VersionMinor>
<BuildMajor>3</BuildMajor>
<BuildMinor>0</BuildMinor>
</Version>
<Type>Release</Type>
<Time>May 20 2008, 16:58:11</Time>
<Builder>sqa</Builder>
</Build>
<LanguageID>1036</LanguageID>
<PartNumber>006-A0119-00</PartNumber>
</Application>
<Computer>
<OperatingSystem>Windows Vista Service Pack 1</OperatingSystem>
<Processor>x86, Processor Level: 6, Processors:4, Model: 23 Stepping: 7</Processor>
<RamSize>2097151</RamSize>
</Computer>
<Time>2008-12-13T08:37:40Z</Time>
</Error>

<Error>
<Exception>
<SubId>5</SubId>
<SourceCodeLocation>
<SourceFileName>WIN_UTILITIES.CPP</SourceFileName>
<SourceFileLine>641</SourceFileLine>
</SourceCodeLocation>
<Extra>Windows Error Code: 5
Accès refusé.
Path: C:\ProgramData\GARMIN\Training Center\TCAcct\Debug\CourseTree.bin</Extra>
</Exception>
<Application>
<Name>Garmin Training Center(r)</Name>
<Build>
<Version>
<VersionMajor>3</VersionMajor>
<VersionMinor>4</VersionMinor>
<BuildMajor>3</BuildMajor>
<BuildMinor>0</BuildMinor>
</Version>
<Type>Release</Type>
<Time>May 20 2008, 16:58:11</Time>
<Builder>sqa</Builder>
</Build>
<LanguageID>1036</LanguageID>
<PartNumber>006-A0119-00</PartNumber>
</Application>
<Computer>
<OperatingSystem>Windows Vista Service Pack 1</OperatingSystem>
<Processor>x86, Processor Level: 6, Processors:4, Model: 23 Stepping: 7</Processor>
<RamSize>2097151</RamSize>
</Computer>
<Time>2008-12-13T08:41:01Z</Time>
</Error>

<Error>
<Exception>
<SubId>5</SubId>
<SourceCodeLocation>
<SourceFileName>WIN_UTILITIES.CPP</SourceFileName>
<SourceFileLine>641</SourceFileLine>
</SourceCodeLocation>
<Extra>Windows Error Code: 5
Accès refusé.
Path: C:\ProgramData\GARMIN\Training Center\TCAcct\Debug\CourseTree.bin</Extra>
</Exception>
<Application>
<Name>Garmin Training Center(r)</Name>
<Build>
<Version>
<VersionMajor>3</VersionMajor>
<VersionMinor>4</VersionMinor>
<BuildMajor>3</BuildMajor>
<BuildMinor>0</BuildMinor>
</Version>
<Type>Release</Type>
<Time>May 20 2008, 16:58:11</Time>
<Builder>sqa</Builder>
</Build>
<LanguageID>1036</LanguageID>
<PartNumber>006-A0119-00</PartNumber>
</Application>
<Computer>
<OperatingSystem>Windows Vista Service Pack 1</OperatingSystem>
<Processor>x86, Processor Level: 6, Processors:4, Model: 23 Stepping: 7</Processor>

<RamSize>2097151</RamSize>
</Computer>
<Time>2008-12-13T08:41:48Z</Time>
</Error>

<Error>
<Exception>
<SubId>5</SubId>
<SourceCodeLocation>
<SourceFileName>WIN_UTILITIES.CPP</SourceFileName>
<SourceFileLine>641</SourceFileLine>
</SourceCodeLocation>
<Extra>Windows Error Code: 5
Accès refusé.
Path: C:\ProgramData\GARMIN\Training Center\TCAcct\Debug\CourseTree.bin</Extra>
</Exception>
<Application>
<Name>Garmin Training Center(r)</Name>
<Build>
<Version>
<VersionMajor>3</VersionMajor>
<VersionMinor>4</VersionMinor>
<BuildMajor>3</BuildMajor>
<BuildMinor>0</BuildMinor>
</Version>
<Type>Release</Type>
<Time>May 20 2008, 16:58:11</Time>
<Builder>sqa</Builder>
</Build>
<LanguageID>1036</LanguageID>
<PartNumber>006-A0119-00</PartNumber>
</Application>
<Computer>
<OperatingSystem>Windows Vista Service Pack 1</OperatingSystem>
<Processor>x86, Processor Level: 6, Processors:4, Model: 23 Stepping: 7</Processor>
<RamSize>2097151</RamSize>
</Computer>
<Time>2008-12-13T12:46:34Z</Time>
</Error>

<Error>
<Exception>
<SubId>5</SubId>
<SourceCodeLocation>
<SourceFileName>WIN_UTILITIES.CPP</SourceFileName>
<SourceFileLine>641</SourceFileLine>
</SourceCodeLocation>
<Extra>Windows Error Code: 5
Accès refusé.
Path: C:\ProgramData\GARMIN\Training Center\TCAcct\Debug\CourseTree.bin</Extra>
</Exception>
<Application>
<Name>Garmin Training Center(r)</Name>
<Build>
<Version>
<VersionMajor>3</VersionMajor>
<VersionMinor>4</VersionMinor>
<BuildMajor>3</BuildMajor>
<BuildMinor>0</BuildMinor>
</Version>
<Type>Release</Type>
<Time>May 20 2008, 16:58:11</Time>
<Builder>sqa</Builder>
</Build>
<LanguageID>1036</LanguageID>
<PartNumber>006-A0119-00</PartNumber>
</Application>
<Computer>
<OperatingSystem>Windows Vista Service Pack 1</OperatingSystem>
<Processor>x86, Processor Level: 6, Processors:4, Model: 23 Stepping: 7</Processor>
<RamSize>2097151</RamSize>
</Computer>
<Time>2008-12-13T12:54:39Z</Time>
</Error>

</ErrorReport>


Si y a quelqu'un qui peut décoder... sachant que j'ai déjà désinstallé, réinstallé tout, et que ça donne la même chose... C'est vilain, hein?


Cela veut dire : change l'appareil, pour un neuf, c'est bientôt Noël :lol: :arrow:
:wink:
JC_sur_le_post_le_plus_long_de_Kikourou :shock:

MessagePublié: 18 Déc 2008, 23:09
par Eric_d_Orient_Alp
pas bête ce "gdraid"
c'est peut être effectivement le "305" qui merdoie.
Papillon, faut que tu regardes de ce côté

MessagePublié: 18 Déc 2008, 23:09
par McFly
tu n'as pas changé le port USB mais as-tu changé autre chose? le Vista SP1 ? les répertoires et chemins d'accès ? les droits d'accès ? Si ça marchait avant, il s'est bien passé quelque chose :roll:

MessagePublié: 19 Déc 2008, 00:48
par gdraid
Papillon adore les 25 bosses :P :P :P :P :P :P :P :P :P :P :P :P :P :P :P :P :P :P :P :P :P :P :P :P :P

le "305" beaucoup moins :? :? :? :? :? :? :? :? :? :? :? :? :? :? :? :? :? :? :? :? :? :? :? :? :?

:wink: :arrow:
JC_qui_offre_un_bisou_de_consolation_à_Cécile

MessagePublié: 19 Déc 2008, 04:48
par georges_v
Salut !
Essaye ça :

Menu Démarrer > Programmes > Accessoires > Outils Système > Restauration du Système

Choisi une option te permettant de revenir plus loin en arrière dans le temps et prend, de préférence, une date et une heure antérieure au dernier moment où tu te souviens que ça marchait encore bien.

Valide, suis les indications à l'écran, ça va redémarrer + afficher un message d'information au démarrage : yapluka croiser les doigts ! :D

MessagePublié: 19 Déc 2008, 16:22
par Papillon
Bon, dés que je rentre du boulot, j'essaie georges... mais ça risque de me faire perdre tout ce que j'ai fait après cette date... si oui, je ne prends pas l'option...

MessagePublié: 19 Déc 2008, 16:23
par Papillon
Au fait, ce n'est pas un 305, mais un 205... il est vilain ce gdraid!!!!!!!

MessagePublié: 19 Déc 2008, 16:51
par leeson
<OperatingSystem>Windows Vista Service Pack 1</OperatingSystem>
<Processor>x86, Processor Level: 6, Processors:4, Model: 23 Stepping: 7</Processor>

l'erreur est là : il faut remplacer Level :6 par 7 et tout va remarcher...

désolé

MessagePublié: 19 Déc 2008, 19:38
par Papillon
Et comment on fait!!!!

MessagePublié: 19 Déc 2008, 20:42
par Eric_d_Orient_Alp
Papillon a écrit:Et comment on fait!!!!

leeson, il fait de l'humour
je reviens là-dessus mais ets ce que ce ne serait pas ta "205" qui serait en panne
as-tu essayé le logiciel sur un autre PC avec ta "2005"
est ce que tu as essayé une autre "205" sur ton PC

MessagePublié: 19 Déc 2008, 21:05
par Papillon
Non, ça ne peut pas être la montre dans la mesure où si j'ouvre trainig machin sans connecter la montre, j'obtiens exactement le même message d'erreur.

De plus, le soucis semble être connu, car en allant voir le lien donné par Eric_d_Orient_Alp, je me suis rendur compte que je n'étais pas la seule... toutefois, les solutions données par les forumer ont l'air de fonctionner, mais pas avec moi.

J'ai pourtant suivi les consignes à la lettre!

leeson, le moment est grave! T'es encore plus vilain que le gdraid, et ça, leeson, faut le faire! Tu apprendras que le Papillon déteste que son joujou ne marche pas parfaitement! Sans trainig center, je ne peux pas rentrer un partenaire virtuel et aller courir avec lui dans les 25 bosses! Et ça, leeson, c'est dramatique!

MessagePublié: 19 Déc 2008, 22:10
par corto
....

MessagePublié: 20 Déc 2008, 01:28
par georges_v
Papillon a écrit:Bon, dés que je rentre du boulot, j'essaie georges... mais ça risque de me faire perdre tout ce que j'ai fait après cette date... si oui, je ne prends pas l'option...


Non, seuls tes programmes (pas fichiers) installés après seront perdus... PAS LES FICHIERS PERSONNELS : eux, au pire, ils retrouveront la place qu'ils avaient au moment de la date restaurée ... et quand ça fait doublon avec le même fichier, le 2e fichier est renommé avec un (1) un (2) etc... à la fin du nom de fichier.
C'est tout.

No panic ! :D

MessagePublié: 20 Déc 2008, 02:25
par Sanggi
as tu la version 3.4.3 ? j avais un pb avec la 3.2.2:

Microsoft visual c++ runtime library
program : c: /garmin/training center/training center.exe
this application has requested the runtime to terminate it in an ususual way. Please contact the application support team for more information.

Du coup j ai telechargé la version 3.4.3, le lien:
http://www8.garmin.com/support/download ... jsp?id=835

et ça marche nickel, good luck

MessagePublié: 20 Déc 2008, 15:25
par Papillon
Oui j'ai la version 3.4.3 depuis pas mal de temps.

Bon il faut que je me lance dans la restauration...

MessagePublié: 21 Déc 2008, 16:46
par Papillon
Je n'arrive pas à créer un point de restauration antérieur, j'en ai créé un à la date d'aujourd'hui à l'heure de tout de suite...

Je suis nulle!!!!!! :evil: :cry:

MessagePublié: 21 Déc 2008, 17:04
par Eric_d_Orient_Alp
Courage papillon
va voir là
http://www.commentcamarche.net/faq/suje ... stauration

Personnellement, je ne suis pas sûr que cela serve à grand chose de revenir en arrière (utilisation des points de restauration).

Est ce que tu as d'autres logiciels "Garmin" d'installer ?
as-tu d'autres messages d'erreur que celui que tu as envoyé ?

MessagePublié: 21 Déc 2008, 21:19
par Papillon
Bon, en fait, j'ai trouvé assez vite, je n'avais pas oser passer à l'étape suivante.
Mais effectivement, cela n'a rien changé. GRRRRRRRRRRRR!

Que c'est casse-bonbek!!! Je vais me fendre d'un coup de fil à garmin. Peut-être me donneront-ils la solution!

Non, pas d'autre messages d'erreur!

Merci, tout le monde! Je suis ouverte à tout autre idée!

MessagePublié: 21 Déc 2008, 21:20
par Eric_d_Orient_Alp
t'as déjà essayé cela que j'ai trouvé sur le net
Tu devrais, si tu n'as pas déjà essayé :
1- Renommer le dossier de Training Center pour recréer ton compte
Par exemple : C:\Documents and Settings\All Users\Application Data\GARMIN\Training Center deviendrait C:\Documents and Settings\All Users\Application Data\GARMIN\Training Center_Old
2- Tu redémarres Training Center
3- Tu sors de Training Center
4- Tu copies tous les fichiers ".bin" (CourseTree, HistoryTree, UserProfile et WorkoutTree)qui devraient être dans un sous-dossier du dossier renommé, dans le dossier C: \ Documents and Settings \ All Users \ Application Data \ GARMIN \ Training Center , nouvellement créé.
ATTENTION : il faut les copier un par un et redémarrer Training Center après chaque copie d'un fichier. Quand l'erreur se produira à l'ouverture de TC, il te faudra détruire le fichier copié.

MessagePublié: 27 Déc 2008, 17:29
par Papillon
Merci Eric... et tous les autres qui avez tenté de m'aider... la dernière solution a été la bonne...

Eric, j'ai fait ce que tu m'as dit à ceci près que je n'ai rien renommé du tout... j'ai effacé tous les fichier.bin dans le dossier garmin et dans le sous-dossier debug. J'ai tout redémarré, et... ça a marché! YES! J'ai dansé dans toute la maison! Inutile de te dire que micro-pap a ouvert des yeux grands comme des soucoupes!!! Bah oui, elle a vu sa mère sous un autre jour... Epona et Chauve-souris, morts de rire... Y a plus de respect, vous dis-je... ayrton faisait à peu près la même tête que kikoureuse-minus!

ça fait 15 jours que je suis sur le sujet, la solution valait bien une danse de sioux!

Au fait... Non Corto... il manque encore un truc à sporttrack. Quand tu transfers ton parcours dans la montre par l'intermédiaire de ST, il faut rentrer une vitesse moyenne. C'est justement ce que je ne voulais pas. TC, même si c'est une usine à gaz, te permet de rentrer ton trajet avec les temps de passages de la date à laquelle tu l'as fait.
Ce qui donne que mon partenaire virtuel ralentit, lui aussi, dans les côtes, et accélère dans les descentes. Dans les 25 bosses, c'est tout de même plus simple à suivre. Avec une vitesse moyenne, sur ce type de parcours, tu ne sais jamais vraiment où tu en es par rapport à la fois d'avant.

MessagePublié: 27 Déc 2008, 18:58
par Eric_d_Orient_Alp
et donc du coup, tu vas passer de bonnes fêtes
et peut être à un de ces jours sur une CO
eric; ancien chef du chef :wink:

MessagePublié: 28 Déc 2008, 09:46
par Papillon
Ouiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii!!!! Je suis contente!!!! Bien que les bonnes fêtes, ne tiennent, fort heureusement, à ce genre de chose!!! :lol:

MessagePublié: 28 Déc 2008, 11:26
par Eric_d_Orient_Alp
Papillon a écrit:Ouiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii!!!! Je suis contente!!!! Bien que les bonnes fêtes, ne tiennent, fort heureusement, à ce genre de chose!!! :lol:

mon "bonnes fetes" etait un peu :wink:

MessagePublié: 28 Déc 2008, 15:42
par Papillon
Je m'en doutais...

Si j'ai un autre soucis, je saurai à qui m'adresser...

MessagePublié: 05 Jan 2009, 00:58
par gdraid
Papillon a écrit:Je m'en doutais...

Si j'ai un autre soucis, je saurai à qui m'adresser...


A qui :?: :?: :?:

A moi :lol: :lol: :lol:

Bonne année Cécile,
et bonne santé,
pour les 25 bosses il en faut :!:
Le 205 ne suffit pas, à travers ce gros tas de cailloux :lol:

Bises à toi et à toute ta petite guirlande de chenilles ... :D
:wink:
JC_de_retour_de_Provence_ce_soir_à_10'_des_25_bosses ...

MessagePublié: 06 Jan 2009, 09:19
par L-ours auvergnat
salut papillon
j'arrive un peu en retard mais de toute façon je ne te serais pas d'une grande aide car tu a bien vue que j'etais nul en informatique.
je voulais juste te remercier pour le coup de main que tu ma donné il y a quelque jour
laurent

MessagePublié: 08 Jan 2009, 22:28
par Papillon
Salut à vous laurent et gdraid!!!

Plein de grosses bises!
Heures au format UTC + 1 heure [ Heure d’été ]
Page 1 sur 1
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/

Votre annonce ici !

Accueil - Haut de page - Aide - Contact - Mentions légales - Version mobile - 0.01 sec
Kikouroù est un site de course à pied, trail, marathon. Vous trouvez des récits, résultats, photos, vidéos de course, un calendrier, un forum... Bonne visite !